Qingdao Kechengyi Environmental Protection and Electric Power Technologies Co.，LTD
Qingdao Kechengyi Environmental Protection and Electric Power Technologies Co.，LTD
Add to Cart
The tension of steel belt conveyor,Its used for the Bottom Ash Conveyor:
Origin: China
Brand: Qingdao Kechengyi
Main components and material: ①The roller assembly (Barrel material: 16 Mn, shaft material: 45 #); ② Bearing: materials: nodular cast iron (QT500-7); ③ Sealing cover: material Q235B.
Attachment: bearings, bolts, oil seal, retaining ring, sealing ring. Tensioning cylinder etc.
Introduction: The stainless steel conveyor belt roller fixed on the tensioning device,the hydraulic automatic tensioning device for the rump, constant tension can be timely to absorb the heat expansion mesh belt, transmission roller conveyor belt movement as a driving under various working conditions in the required tension, nonskid stop the drive more reliable.
In the dry slag chassis, stainless steel conveyor belt transmission and return there are partial prevention on both sides of the wheel, the wheel can prevent stainless steel conveyor belt running deviation.
The daily maintenance of dry slag:
1, We should check the conveyor chain tension every year, drive roller bearing seat, chain tension, the shaft bearing filled the lithium base; The roller bearing pedestal filling calcium base grease.
2, For the first time to use the speed reducer, run after a month, should be replaced according to the requirement of the speed reducer lubrication oil. After changing a lubricating oil every six months, we should be replaced under the operating temperature lubricating oil.
3, every month, the lubricating oil for check-up, to ensure that the reducer in the amount of lubricating oil in the oil level of the prescribed level.
4, Wear more than 5 mm (wear) running deviation prevention wheel, roller and so on, should be replaced in a timely manner.
5, Conveyor chain connecting screw when desoldering loose is found, should be tightened, and spot welding of stainless steel electrode is firm.
6, We should cleaning the chain scraper and plate for inspection every month, if it is serious to wearing away of a skateboard and plate should be replaced.
7, The damaged parts should be replaced in a timely manner.
8, When the conveyor chain serious running deviation, should be through adjusting roller, drive roller, tension roller position to correct.