Stainless Steel Conveyor Belt / Wire Mesh Belt Conveyor Heat Resistance

Stainless steel conveyor belt,used in Dry Slag Extractor,Its material is Stainless Steel 304 or 316 :

Technological requirements:

Stainless steel wire mesh around the thread diameter of Φ 4 / Φ 5 mm,Adopt double strands,Steel plate using die stamping production,The heat resistance above 800 ℃,Timetime guarantee value not less than 50000 h,

The appearance of belt quality:

Steel belt and the string of a smoon surface,Bending is not allowed to have obvious indentation.

Ensure the quality of mesh and string of welding,When the short-term or long-term high temperature strength of the joint is not less than the corresponding values of parent metal,And welding parts surface is smooth,stainless steel conveyor of the straight line segment is flat,Flatness error is 0.8 mm or less；

Stamping surface height consistent, error is 0.5 mm or less；Bearing steel reliable lap closely, in time can not have leakage phenomenon of ash. The height of two wing steel plate consistent, no cock phenomenon. Assembly rear suspension plate plane is horizontal, the error of height is 1 mm or less.

Assembly rear suspension plate lateral to keep a straight line, the error of 1 mm or less. Mesh belt connected to the steel plate of heat-resisting stainless steel screw, connecting plate. Sink hole depth is consistent to ensure that the screw on the plane and plane level on the main board.

The retaining bolt. Spot welding with stainless steel conveyor after each screw fastening plate, at least two welding point between mesh belt and steel surface treatment is required, and the surface is clean, no oil and the brightness is consistent.

Dry Type Slag Conveyor:

Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. is a comprehensive enterprise focusing on equipment research and development, equipment manufacturing, and service, especially for the thermal power plant auxiliary equipment and environmental protection equipment. The company has rich design and manufacturing experience and many successful performances on the ash handling, slag handling, dust removing, desulfurization and denitration for CFB boiler and pulverizing coal boiler.