Qingdao Kechengyi Environmental Protection and Electric Power Technologies Co.，LTD
Qingdao Kechengyi Environmental Protection and Electric Power Technologies Co.，LTD
Add to Cart
Drag mechanism,Its material is Q235,45 and QT700-2,for the Scraper Conveyor:
Concave tooth shape drag sprocket with large load capacity, guide performance is good, eliminate off chain due to wear chain pitch increasing phenomenon, to avoid the chain running deviation.
Drag wheel adopt plate structure, maintenance can be pulled out from the shell of a complete set of institutions, when maintenance it is convenient and fast to replace.
Drag chain wheel replacement:
When the sprocket badly worn cannot be guaranteed and the chain of normal mesh, easy to take off the chain phenomenon, should be timely replacement of a new sprocket. Sprocket use the fasteners such as bolts and fixed on the wheel hub, to replace the former should be off the chain. Note: the replacement of sprocket must be replaced in pairs,it do not allow change the single section.
MGB series scraper conveyor is suitable for conveying coal ash powder, particle materials innovation products. It can be widely used in thermal power, building materials, chemical industry, mining, metallurgy, machinery, etc. Mainly by the unit head, tail units, driving mechanism, the standard section, scraper, chain and other parts.
MGB series scraper conveyor is suitable for conveying coal ash powder, particle materials innovation products. It can be widely used in thermal power, building materials, chemical industry, mining, metallurgy, machinery, etc. Mainly by the unit head, tail units, driving mechanism, the standard section, scraper, chain and other parts.
Model and Meanings:
Model: MGBC (M)-B×L
MGB: take the first letter of the Chinese meaning of the embedded scraper i. e. Mai Gua Ban
C (M): C means the chain is circular chain, M means the chain is Drop-forged rivet-less chain. If the C/M is omitted, it means the chain is circular type.
B refer s to the width of the scraper, which includes sizes of 300mm, 400mm, 500mm, 600mm, 800mm, 1000m, and 1200mm.
L refers to the length of the conveying pass. (Unit: mm)