Large Overlapping Bucket Conveyor System / Tensioning Mechanism No Slag Leaking

Tail tensioning mechanism,Its material is Q235,45 and QT700-2,used for the Bucket Conveyor System:

Introduction:

Bucket conveyor by actuator, head device, operation part, tail device and feeding device and other parts. Head driven by a drive device of the sprocket, traction with the material conveying bucket along the orbit, the material discharged from the head cover, so as to achieve the purpose of conveying material. Chain conveyor is a kind of can not only horizontal conveying, and ascension of the tilt conveyor equipment.

the tail tensioning device of chain bucket conveyor convenient adjustment, to adapt to the degree of material thickness change of conveying equipment, bucket conveyor tensioning device adopts spiral spring tension, by two tail wheel, a tail shaft, and a pair of tensioning of screw and compression spring. Two tail bye sets on the shaft, in order to solve the two caused by error of sprocket sync problem; As a result of the action of the spring, the device can make the automatic traction chain tension adjustment. The device is particularly suitable for long distance, heavy load of the conveyor.

The material be delivered by the inlet introduced and serving in the hopper, conveying by drag chain hopper, got to the first round of material discharged from the discharging mouth will change direction. In the whole process of conveying, the conveying speed slow, no relative movement between clinker and hopper, so wear less, operation fault is less, but also from the bottom of the cooler by a conveyor to the top of clinker silo, almost do not have dust