Dewatering Bin For Thermal Power Plant Boiler Coal Slag Dehydration

Dewatering bin,Its material is Stainless Steel and Q235(or Q345B):

Dewatering bin is a ash dehydration, automatic storage and discharge of three kinds of the equipment. Used in thermal power plant boiler coal slag and gravel or other solid material dehydration, temporary. It install two dewatering bin usually, mutual switch used interchangeably.

Dewatering bin include the capsule, granule, underflow baffle and overflow weir, the filter element, the discharge gate, platform, vibrator, bracket parts, such as slurry into ash dehydration, has been at the top of the stainless steel of classifier, fine particles and mortar through grain into the heart of the dewatering bin, larger particles has been points to jilt to the silo wall. Upper dewatering bin bottom baffle, precipitate area flow smoothly, conducive to settlement. By sawtooth cofferdam into the overflow tank overflow water, reduce the overflow water speed, effectively reduce the ash content, the overflow drain the water into the return water system or drainage. Discharge door is equipped with electric pneumatic device, drainage and gas sealing device, the bottom of the silo discharge above the door is equipped with two vibrators, facilitate the storehouse of slag discharge.

(1) the slag discharge gate adopt unique seal structure, the sealing performance is superior to the existing variety of dehydration.

(2) the control part is composed of control cabinet, material level meter, etc, it not only can operation process automatic dehydration storehouse interlocking but also can be single manual control.

Dewatering bin ash deposition in material level after reaching the rated highly stop grout injection, then after six to eight hours calm filtered water, ash water content below 25%, the performance good, strong adaptability, reliable work.

Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. has established perfect quality control system and carried out the manufacturing and management of the equipment according to the requirements of ISO9001 quality management system; In order to have better participation in the international thermal power field, the company has obtained relevant qualifications to directly import and export the power plant equipment and spares. The company has excellent research and development team and experienced production team, which makes the annual production capacity reaches 4000 tons. The products have been adopted by more than hundreds of power plants at home and abroad for the excellent product quality and after-sales service.