Slag Control Room Dust Collection System With LD31 Aluminum Alloy Door

Slag control room,Its used for the Dust Collection System:

Material selection:

1 The door adopt LD31 aluminum alloy, timber wood plate indoor decoration, the inner surface plastic panel.

2 The doors and windows aluminum frame material, the wall thickness shall not be less than 1.2 mm, the facade with aluminum alloy plate shall not be less than 0.5 mm.

aluminum alloy:

1, The interior decoration should be fully considered electrical device wiring requirements. Wooden timber should plate fixation, the plastic stick on the panel generally is blue, splicing of rational aesthetics.

2, The door should be performed after the completion of the steel frame, door frame according to the steel frame with actual size. Door adopt single flat open the door, door open direction to open outside, gate shaft arranged in the window position. In the upper part of the door should be set the observe hole.

Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. is a comprehensive enterprise focusing on equipment research and development, equipment manufacturing, and service, especially for the thermal power plant auxiliary equipment and environmental protection equipment. The company has rich design and manufacturing experience and many successful performances on the ash handling, slag handling, dust removing, desulfurization and denitration for CFB boiler and pulverizing coal boiler.

Adhering to the "first-class design, first-class products, first-class service" principle, the after-sale service department of the company can provide excellent pre-sale service, sales service and after-sale service to the customers.

1, Pre-sale service: dealing with various consultations and questions, and sending professional technical personnel to do on-site investigation to provide preliminary design plan and reasonable suggestions.

2, Sales service: the engineering technicians will keep contact with the customers positively so as to adjust the design plan, production schedule, and delivery time immediately based on the needs of the customer and report the progress to them at any time, and do all the best to meet the requirements of customers.

3, After-sale service: implement “provide on-site service in 24 hours system”, which means the personnel will arrive the customers’ working site to provide service within 24 hours after we got the call of the customers (in China). We will provide high-quality products and good service to the customers and sincerely welcome new users come to visit our company at the same time.