
Add to Cart
Double shaft mixer,Its material is Q345,45,QT700-2 and Q235,for the wet discharge system:
SJ Series Double Shaft Mixer :
Introduction:
The double shaft mixer has two screw shafts with symmetrical-distributed blades, one rotating to the right while the other rotating to the left at the same time, which can spray water to the dry ash/slag while conveying to mix and wet the material evenly so as to achieve the goal that no leaking of dry ash and no the seepage of water, and finally load the wet material to the truck or other conveying equipment. The moisture of the wet material is adjustable among 15 - 25%.
Characteristics of Equipment:
The drive mode for two main shafts is synchronous gear transmission
This drive mode can ensure the two shaft have a reliable synchronization. For the mixer adopting chain drive mode, the two shaft may has dis-synchronization for the falling of chain caused by insufficient tension, which may damage the screw shaft and blades.
Material Guarantee
The blades adopt special wear-resistant alloy, the water spray system uses stainless steel atomizing nozzle, and U-shaped trough is made of manganese steel plate with thickness no less than 10mm.
Technical Parameter
Model Parameter |
SJ-40 | SJ-60 | SJ-100 | SJ-200 |
Output (t/h) | 40 | 60 | 100 | 200 |
Water ejecting pressure (MPa) | 0.2-0.6 | 0.2-0.6 | 0.2-0.6 | 0.2-0.6 |
Reducer model | XWD11-8 | XWD15-8 | XWD22-10 | XWD30-10 |
Motor power (KW) | 11 | 15 | 22 | 30 |