Qingdao Kechengyi Environmental Protection and Electric Power Technologies Co.，LTD
Qingdao Kechengyi Environmental Protection and Electric Power Technologies Co.，LTD
Add to Cart
Pump is also called the warehouse pump,it is conveying powder material of a kind of reliable dynamic pressure dense-phase pneumatic conveying device. Pump convey has two kinds for conveying, one is the most commonly used way of convey, and at the bottom of the tank material through conical surface aeration tank filling, nozzle jet or other methods to fluidization; It set on the bottom fluidized pneumatic plate (layer) can make the material convey through the upper portion of the tank. Conveying gas in the tank different input plane distribution depends on the material properties.
Pump convey is a discontinuous transmission process, before the pump fille with the material delivered within, all valves are closed.
Dense Phase Pneumatic Conveying System
General Introduction:
The dense phase pneumatic conveying system is applicable to the conveying of powder material as dry ash, cement, and industrial chemicals. It is a high efficiency, zero pollution conveying system, widely used in the material conveying in industry of power plant, building materials, and chemicals.
Technical Characteristics
High Energy Saving
For the reasonable fluidizing structure, the fluidizing state of the material is good, and the air consumption is obviously lower than the same function equipment. After years research and development, we have improved the fluidizing structure for many times to improve the working efficiency and lower the energy consumption.
High Material-Air RatioIf the fluidizing effect is good, air consumption is low, the material-air ratio will be high. The test has shown that when the equivalent distance is within 500m, the ratio will reach above 30Kg (ash)/Kg (air)
Low Material Flowing Speed
Because the air consumption is low and the material-air ratio is high, the material will have shunting movement in the pipe, achieving dynamic and static pressure conveying. Therefore, the flowing speed of the material is slow, the abrasion of the valve and pipeline is low, and the service life of the wearing part is long.